Versatile Pipe Connector
A Malleable Iron Fitting is a cast iron component that has been heat treated. This fitting has a 15 mm bore with a 21 mm outer diameter. The fitting has a 30 mm length with internal threads. The fitting has a 1.5 mm wall thickness for lightweight strength. Many compressed air systems use this fitting for distribution lines. The malleable process gives the iron better ductility than standard cast iron.
Zinc Plated Finish
The Malleable Iron Fitting has a bright zinc plating for corrosion resistance. The plating has a 5 micron thickness on all surfaces. This fitting has a 5,000 psi burst pressure rating. The fitting has a 300 psi working pressure rating. The product is made from ASTM A197 material. The material has a 40,000 psi minimum tensile strength. This fitting has a 2 year warranty against zinc flaking. The fitting has a 120°C maximum operating temperature.
Good for Compressed Ai
A Malleable Iron Fitting is the standard choice for air systems worldwide. This fitting has a 2 year warranty on the zinc plating. The fitting has a 1.2 mm thread depth for secure connections. The fitting has a 1.8 Nm assembly torque recommendation. The product has a 3 year warranty against cracking. Buy this fitting for your workshop air network. The ductile iron will not shatter under shock loads.
Compare Properties
|
Parameter |
Value |
|
Nominal Size |
15 mm (1/2 inch) |
|
Outer Diameter |
21 mm |
|
Thread Type |
Female NPT |
|
Working Pressure |
300 psi |
|
Plating Thickness |
5 microns |
Hot Tags: malleable iron fitting, China malleable iron fitting manufacturers, suppliers, factory, Barbed Elbow Fittings, corrosion resistant elbow air connector, Elbow Quick Connector, Galvanized Pipe 45 Degree, low pressure pneumatic elbow connector, quick connector
