Blog

In the design of gaseous fire suppression systems, tees are preferred for horizontal branch lines, limiting the use of four-way fittings to avoid the

Remove the retaining circlip from the pull arm shaft, and remove the pull arm shaft, pull arm, balance spring, and steel ball.

Pneumatic braking systems utilize compressed air as the power source for braking.

The braking system consists of a control system, a hydraulic system, and a power assist system.

Choosing the right brake is a prerequisite for ensuring the safe and efficient operation of the system.

A pneumatic disc brake is a device that uses compressed air as a power source to achieve braking by generating friction through clamping a brake disc.

The device includes a brake disc, with an external sealing and protective mechanism.

If the cross-sectional runout error of the brake disc is greater than 0.06mm when measured with a dial indicator, and the brake disc surface has obvio

Vegetable oil-based brake fluids cannot meet the requirements of disc brakes, therefore high-boiling-point synthetic brake fluids must be used.

Generally, there is no frictional force assist, therefore the braking performance is less affected by the coefficient of friction, meaning its perform

During braking, hydraulic fluid is forced into the inner and outer wheel cylinders. Under hydraulic pressure, the pistons press the two brake pads aga

Compared to drum brakes, disc brakes have a flat working surface with heat transfer on both sides.