Product Overview

 

The Tongda Pneumatic Disc Brake is engineered for high-cycle industrial tension control, dynamic deceleration, and emergency stopping. Operating via compressed air actuation, it converts pneumatic pressure into mechanical clamping force against a rotating brake disc.


Unlike standard spring-applied or electromagnetic brakes, this pneumatic design delivers adjustable, proportional braking torque controlled directly by line air pressure (0.2 to 0.7 MPa). Built with a nodular cast-iron caliper body and heavy-duty friction facings, it ensures stable thermal dissipation and consistent torque output under continuous industrial operation. Designed for direct integration into OEM machinery such as industrial weaving frames, cable spooling stands, and material handling conveyors.

 

 
  • Friction-reducing Gasket
    The Friction-reducing gasket is a specialized component engineered to extend the life of moving parts in high-cycle hydraulic and automotive systems. With 35 years of manufacturing experience, we
  • Anti-friction Washer
    This anti-friction washer is designed to reduce friction between moving parts. It can be pressed directly into position between components. Each washer is made of carbon steel. The outer diameter is
  • Rear Main Cap
    This rear main cap serves as a positioning base for mechanical assembly. It can be pressed directly onto your equipment. Each part is made of carbon steel.
  • Compression Spring Washer
    This compression spring washer is used for pressing and sealing applications. It can be installed directly in positions requiring a tight fit. Each product is made of carbon steel.
  • Stop Plate
    This stop plate is used to limit movement in mechanical systems. It can be installed directly at the position where motion needs to be stopped. Each part is made of carbon steel.
  • Gasket for High Temperature and Pressure
    This gasket for high temperature and pressure is used to seal pipes or equipment. It can be installed directly in areas requiring a tight seal. Each gasket is made of carbon steel.
  • 90 Degree Angle Brackets Hardware
    This90 degree angle brackets hardware is used to support pipes or equipment. It can be installed directly at the required support position. Each product is made of carbon steel.
  • Air Disc Brake Pressure Plate
    This air disc brake pressure plate is used to securely clamp and hold workpieces. It can be pressed directly into position. Each product is made of carbon steel.
  • Air Disc Brake Bottom Cover
    This air disc brake bottom cover is used to seal the bottom of pipes or housings. It can be pressed directly onto the bottom section. Each product is made of carbon steel.
  • Guide Pin Dust Cover Washer
    This guide pin dust cover washer is used to seal and secure the guide pin dust cover. It can be pressed directly onto the dust cover. Each product is made of carbon steel.
  • Plummer Block Locating Ring
    This plummer block locating ring is used to position workpieces precisely. It can be pressed directly onto your tooling. Each product is made of carbon steel.
  • Gland Cap
    This gland cap is used for pressing and sealing different components. It can be pressed directly into position. Each product is made of carbon steel.
First 12 Last
 
Rear Main Cap

 

Key Features

Proportional Torque Control: Braking torque scales linearly with supplied pneumatic pressure, allowing fine-tuned tension and deceleration profiles.


Rapid Response Time: Short air-path routing and low-inertia piston design achieve brake engagement in under 0.15 seconds.


Effective Thermal Dissipation: Ventilated disc configurations and high-conductivity alloy caliper housings prevent thermal fading during high-frequency cycling.


Easy Maintenance Design: Open caliper structure permits visual inspection and friction pad replacement without disassembling the entire drive shaft assembly.


Modular Mounting: Flange and bracket mounting options fit standard industrial frame clearances.

 

Technical Specifications
 

Parameter

Specification Unit

Standard Metric / Imperial Range

Max. Braking Torque

N * m / lb * in

120 - 4,500 N * m (dependent on disc diameter and pressure)

Operating Air Pressure

MPa / psi

0.2 - 0.7 MPa (29 - 101 psi)

Brake Disc Diameter

mm / inches

diameter 200 - diameter 1,200 mm

Friction Material

Type

Non-asbestos, high-friction coefficient organic/metallic composite

Max. Operating Speed

RPM

Up to 3,000 RPM (dynamically balanced)

Response Time

Seconds

less than 0.15 s (engagement) / less than 0.10 s (release)

Ambient Operating Temp.

degrees C / degrees F

-20 degrees C to +85 degrees C (extended temp seals available)

Housing Material

Alloy / Cast

Nodular cast iron (GGG40) / CNC-machined aluminum alloy

 

 

Applications

Industrial Textile Machinery: Tension control and emergency braking on high-speed warping machines, looms, and batching units.


Wire and Cable Manufacturing: Constant-tension pay-off and take-up stands for wire drawing and stranding lines.


Converting and Packaging Equipment: Film slitting, printing press web tensioning, and roll unwind stands.


Material Handling Conveyors: Inclined belt conveyor holding brakes and automated storage/retrieval systems (AS/RS).

Air Disc Brake Bottom Cover

 

Customization Options
 
Stop Plate
 

Caliper Orientation

Left-handed or right-handed mounting configurations to match restricted machinery spatial envelopes.

 

Seal Compounds

Viton (FKM) seals for high-temperature environments or low-temperature sub-zero (-40 degrees C) nitrile variants.

Compression Spring Washer
Rear Main Cap
 

Special Coatings

Nickel-plated caliper bodies and anti-corrosion stainless steel hardware for marine, saline, or chemical processing environments.

 

Mounting Brackets

Customized adapter plates engineered to bolt directly onto existing OEM machinery chassis without retrofitting.

Air Disc Brake Bottom Cover

 

Gland Cap

 

Quality Control

Material Traceability: All nodular cast iron raw materials undergo chemical composition analysis via spectrometer before machining.


Precision Machining: Caliper bodies and piston bores are finished on 5-axis CNC machining centers to maintain bore tolerances within plus or minus 0.01 mm.


Pneumatic Leak Testing: 100% of assembled units undergo a 1.2 MPa pneumatic pressure decay test underwater for 3 minutes to guarantee zero seal leakage.


Torque and Durability Bench Testing: Random sampling batches undergo 100,000 continuous actuation cycles on dynamometer test rigs to verify wear rate and torque consistency.

 

Packaging and Shipping

Internal Protection

Wrapped in VCI (Volatile Corrosion Inhibitor) anti-rust film and secured in high-density custom molded EPE foam.

Export Crate

Packed in Fumigation-Free ISPM 15 compliant plywood boxes designed for ocean freight and international air cargo.

Included Documentation

Each shipment includes individual QC inspection reports, pneumatic schematic diagrams, material certificates (EN 10204 3.1), and maintenance manuals.

 

 

Frequently Asked Questions

 

Q: How do I select the correct disc brake size for my application?

A: Brake sizing requires calculating the required braking torque based on your machine's rotating inertia (J), rotational speed (N), and target stopping time (t). Provide your application parameters (torque, RPM, disc space limit) to our engineering team at tongdaparts.com, and we will generate a complete torque calculation sheet within 24 hours.

Q: Can Tongda pneumatic disc brakes directly replace brands like Svendborg or Wichita?

A: Yes. Our mounting dimensions, disc thicknesses, and torque output profiles are engineered to match standard European and North American industrial footprints, allowing drop-in replacement without modifying your existing machine frame.

Q: What is the standard lead time for standard models vs. custom configurations?

A: Standard off-the-shelf pneumatic disc brake calipers and discs ship within 5 to 7 business days. Custom-engineered mounting brackets, special seal compounds, or unique surface treatments typically require 15 to 25 business days from drawing approval.

Q: What maintenance is required during the lifespan of the friction pads?

A: The open caliper design allows quick visual inspection of friction pad thickness. Replace the friction facings once wear reaches the minimum safety limit marked on the pad backing plate. No special hydraulic bleeding or complex tools are required—replacement takes under 15 minutes per caliper.

Q: What pneumatic air preparation is required prior to the brake inlet?

A: To ensure optimal seal longevity and valve response, supply dry, filtered, and lubricated compressed air (filtration rating less than or equal to 40 microns). We recommend installing an air filter-regulator-lubricator (FRL) unit immediately upstream of the brake control valve.

Q: What quality certifications and material reports accompany the shipment?

A: All units are manufactured under ISO 9001 quality management standards. Upon request, we provide EN 10204 3.1 material test certificates for structural components and individual factory pressure test logs.

 

modular-1
Request For Quotation

Need engineering drawings, 3D STEP files, or volume pricing for your equipment line? Submit your specifications below.
Required Braking Torque (N * m): [Input Value]
Operating Air Pressure (MPa): [Input Value]
Disc Diameter / Thickness Requirement: [Input Value]
Application / Industry: [Textile / Cable / Conveyor / Other]
Estimated Annual Volume (Units): [Input Value]
Remove unsupported technical claimsClarify product model selection data

As one of the most professional pneumatic disc brake manufacturers and suppliers in China, we also support customized service. We warmly welcome you to wholesale high quality pneumatic disc brake in stock here from our factory. For quotation, contact us now.

Anti friction Washer, Gland Cap, Plummer Block Locating Ring
Send Inquiry