Working principle of disc brake

Mar 10, 2026

Leave a message

During braking, hydraulic fluid is forced into the inner and outer wheel cylinders. Under hydraulic pressure, the pistons press the two brake pads against the brake disc, generating frictional torque and thus braking. At this time, the edge of the rectangular rubber seal ring in the wheel cylinder groove undergoes a slight elastic deformation under the frictional force of the piston. When the brake is released, the piston and brake pads return to their original positions using the elastic force of the seal ring and the spring.

 

Because the deformation of the rectangular seal ring's edge is very small, the gap between the friction pads and the disc is only about 0.1mm on each side when not braking, which is sufficient to ensure brake release. Furthermore, because the thickness of the brake disc only changes slightly when heated, there is no "slippage" phenomenon. In addition to its sealing function, the rectangular rubber seal ring also serves to return the piston to its original position and automatically adjust the gap. If the gap between the brake pads and the disc wears down, even after the seal ring deforms to its limit during braking, the piston can still continue to move until the friction pads press against the brake disc. After the brake is released, the rectangular rubber seal ring pushes the piston back the same distance as before wear, maintaining the standard value.

Send Inquiry