Connect Different Hose Sizes

A Reducing Barb joins two hoses of different diameters. This barb has a larger end and a smaller end. The larger end measures 12 mm in outer diameter. The smaller end measures 8 mm in outer diameter. Many irrigation systems use this fitting for connecting main lines to drip lines. The barb provides a leak-free transition between hose sizes.

Sharp Ribs for Grip

The Reducing Barb has four sharp ribs on each end. The ribs dig into the hose inner wall for a secure hold. This barb has a 45 degree taper between the two ends. The taper reduces stress on the hose during bending. The Reducing Barb is made from brass for corrosion resistance. The brass material has a 60,000 psi tensile strength. This barb has a 3 year warranty against cracking under normal use.

Good for Drip Irrigation

A Reducing Barb is essential for transitioning between main and branch lines. This barb has a 1 year warranty against leakage at the joint. The barb has a smooth inner bore that does not restrict flow. The barb works with rubber, PVC, and silicone hoses. The Reducing Barb has a 100°C maximum temperature rating. Buy this barb for your irrigation project. The grip will keep your hoses connected under pressure.